Universal Audio 6176 Vintage Channel Strip


Art.nr: UNI-6176
35.525,-
3-5 Dagers leveringstid

Det klassiske Universal Audio lyden framheves virkelig i denne enheten. Krystallklar diskant, ren bass i et varmt varmt rør-lydbilde. 6176 fremhever til og med din mikrofons karakter og plasserer sangen direkte i din miks.

Om du lurer på hvordan de fleste studios får sangen til å virkelig å høres er svaret enkelt: 6176.

6176 Mic preamp er basert på Bill Putnams legendariske 610 konsoll. All Tube! 6176 Kompressor 1176LN behøver egentlig ingen forklaring. Det er ikke uten grunn at det nesten finnes en i alle større studioer!

"As soon as we started with the 6176 there were smiles all around, so it stayed on the session. Thanks UA!"



6176 Vintage Channel Strip
A Classic Tube Microphone Preamp and 1176-Style Compressor in a Single Unit.
The 6176 Vintage Channel Strip combines the alluring, all-tube sounds of the legendary Bill Putnam-designed 610 microphone preamp, with the signature FET compression of our 1176LN, to create the ultimate recording channel strip. The warm, smooth tones of this mic preamp design employed to record everyone from Frank Sinatra to Van Halen, and the unique characteristics of the compressor, are two major reasons why the 6176 is found in studios around the world.
All-tube mic preamp section derived from legendary Bill Putnam-designed 610 modular console
Signature 1176LN Class A FET compressor section, as heard on countless hit records for more than 30 years

"Split" or "Join" switch allows separate or series operation of the preamp and compressor
High and Low frequency shelving EQ
Variable impedance Input, Gain, and Output levels
Mic, balanced Line, and Hi-Z inputs
Ultra-quiet operation
Stereo interconnection via 1176-SA
Hand-built in USA

FEATURES
All-tube mic preamp section derived from legendary Bill Putnam-designed 610 modular console
Signature 1176LN Class A FET compressor section, as heard on countless hit records for more than 30 years
"Split" or "Join" switch allows separate or series operation of the preamp and compressor
High and Low frequency shelving EQ
Variable impedance Input, Gain, and Output levels
Mic, balanced Line, and Hi-Z inputs
Ultra-quiet operation
Stereo interconnection via 1176-SA
Hand-built in USA

In "Join" mode, a single input signal is fed through the microphone/instrument preamp and then through the compressor. In "Split" mode, one signal can be fed into and out of the preamp/EQ section while a second can be fed into and out of the compressor section.

CONNECTIONS
Preamplifier Section Microphone (Female XLR)
InputsBalanced Line (Female XLR)
 Unbalanced Line/Instrument (1/4" jack) (D.I.)
OutputsBalanced Line (Male XLR) for use in "Split Mode"
Compressor SectionInputBalanced Line (Female XLR) for use in "Split Mode"
OutputBalanced Line (Male XLR)

CONTROLS
Preamplifier Section Microphone: 500 ohm, 2 kOhm
Input SelectBalanced Line
 Hi-Z instrument: 47 kOhm, 2.2 MOhm
Variable Gain
(Input Feedback Control)5 dB increments @ -10, -5, 0, +5, +10 dB
Output Level Control
HF Shelf EQSwitchable boost/cut: 1.5, 3, 4.5, 6, 9 dB
Corner Frequency Select: 4.5 kHz, 7 kHz, 10 kHz
LF Shelf EQ
Switchable boost/cut: 1.5, 3, 4.5, 6, 9 dB
Corner Frequency Select: 70 Hz, 100 Hz, 200 Hz
Other-15dB Pad Switch
Polarity Reverse Switch
48 Volt Phantom Power Switch
Join/Split Switch (for joint or independent compressor/preamplifier operation)
Compressor Section Input Gain
Output Gain
Attack
Release
Bypass
1:1
4:1
Compression Ratio: 8:1, 12:1. 20:1 and "All Button" mode
Preamp Output
Meter Select Compressor Gain Reduction
Compressor Output

TECHNICAL SPECIFICATIONS
Microphone (selectable)
- 500 ohms or 2K ohms
Input ImpedanceBalanced Line ñ 3.8K ohms
 Hi-Z (selectable)
-2.2 Meg ohms or 47K ohms
Vacuum Tubes(1) 12AX7A and (1) 12AT7 per channel
Power Requirements115/230 volts
Weight 5Kg
Dimensions19" Rackmount chassis, 2U